Netis P106C 4POE+2RJ45 100M Standard POE Switch
Supporting 802.3 Ethernet, 802.u Faster Ethernet；
Supports POE IEEE 802.3af/at compliant Powered Device (PD)
Modes: Normal switch mode/Extended mode(Port1-4:250Metres ultra-long transmission)
Ports 1~4 features POE power supply capability and can be used as Power over
৳ 3,200.00
Product Description
| Hardware | |
| Interface | 4*10/100Mbps POE ports（Data/Power）
2*10/100M uplink RJ45 ports (Data) |
|
Basic function
|
Follow IEEE 802.3 Ethernet and IEEE802.3u Fast Ethernet Protocol
Supports POE IEEE 802. 3af/at compliant Powered Device (PD)
Store-and-forward switching scheme |
|
Standards
|
IEEE 802.3 10BASE-T Ethernet
IEEE 802.3i 10BASE-T Ethernet
IEEE 802.3u 100BASE-TX Fast Ethernet |
|
Mode
|
Normal switch mode/Extend mode
|
|
Data Transfer Rate
|
Etherent:10Mbps(Half-duplex);20Mbps(Full-duplex)
Fast Entherent:100Mbps(Half-duplex);200Mbps(Full-duplex) |
|
Store & Forwarding
|
Yes |
|
Switching Capacity
|
1.2G |
|
MAC Address
Table Size
|
2K |
|
Jumbo Frame
|
2048 byte
|
|
Environment
|
Operation Temperature：0℃～40℃
Storage Temperature：-40℃～70℃
Operation Humidity：10%～90% RH Non-condensing
Storage Humidity：5%～90% RH Non-condensing
|
|
Power Input POE
Standards
|
Single port maximum power 30W,
Whole switch maximum power 58W Support over-current,over-voltage and short-circuit protection Support Soft Start of High Power PD Support sequential boot-up
Power Supply Pin:12+/36-
AC 110~240V 50/60HZ
|
|
Cabling type
|
100Base-TX: Cat 5e or better UTP/STP(≤100m)
10Base-TX: Cat 5e or better UTP/STP(≤250m)
|
|
Dimensions
(L x W x H )
|
124mm*115mm*33mm
|
More Information:
Name: Imran Hosan
Phone Number: 017777-734126
Email: imran.hosan@smart-bd.com
There are no reviews yet.