GIGABYTE INTEL Z890 AI TOP LGA1851 Dual Thunderbolt 5 Type-C with DP-Alt Motherboard

Product Description

• CPU:
  LGA1851 socket: Support for Intel® Core™ Ultra Processors
  L3 cache varies with CPU
  * Please refer to “CPU Support List” for more information.
• Chipset: Intel® Z890 Express Chipset
• Memory:
  Support for DDR5 9500(O.C)/ 9466(O.C) / 9333(O.C) / 9200(O.C)/ 9066(O.C) / 8933(O.C) /8800(O.C) /8600(O.C) / 8400(O.C) /8266(O.C) / 8200(O.C) / 8000(O.C) / 7950(O.C) / 7900(O.C) / 7800(O.C) / 7600(O.C.) / 7400(O.C.) / 7200(O.C.) / 7000(O.C.) / 6800(O.C.) / 6600(O.C.) / 6400 / 6200 / 6000 / 5800 / 5600MT/s memory modules.
  4 x DDR5 DIMM sockets supporting up to 256 GB (64 GB single DIMM capacity) of system memory
  Dual channel memory architecture
  Support for ECC Un-buffered DIMM 1Rx8/2Rx8 memory modules (operate in non-ECC mode)
  Support for non-ECC Un-buffered DIMM 1Rx8/2Rx8/1Rx16 memory modules
  Support for Extreme Memory Profile (XMP) memory modules
  Support CUDIMM memory module
  (The CPU and memory configuration may affect the supported memory types, data rate (speed), and number of DRAM modules, please refer to “Memory Support List” for more information.)
• Onboard Graphics:
  Integrated Graphics Processor+Intel® Thunderbolt™ 5 Controller:
  – 2 x Intel® Thunderbolt™ 5 connectors (USB4® USB Type-C® ports), supporting DisplayPort and Thunderbolt™ video outputs and a maximum resolution of 7680×4320@60 Hz (single display output)
  * Because of the limited I/O resources of the PC architecture, the number of Thunderbolt™ devices that can be used is dependent on the number of the PCI Express devices being installed. (Refer to Chapter 2-6, “Back Panel Connectors,” for more information.)
  * Support for DisplayPort 2.1 version and HDCP 2.3

  Integrated Graphics Processor-Intel® HD Graphics support:
  – 1 x Front Intel® Thunderbolt™ 4 connector (USB4® USB Type-C® port), supporting DisplayPort and Thunderbolt™ video outputs
  When a Thunderbolt™ monitor is installed, the maximum resolution supported is 5120×2880@60 Hz with 24 bpp (single display output).
  When a USB4® USB Type-C® monitor is installed, the maximum resolution supported is 3840×2160@240 Hz (single display output).
  * Support for DisplayPort 2.1 version and HDCP 2.3

  – 1 x HDMI port, supporting a maximum resolution of 4096×2160@60 Hz
  * Support for HDMI 2.1 version and HDCP 2.3.

  (Graphics specifications may vary depending on CPU or graphics card support.)
  Support for up to triple-display at the same time

• Audio:
  ESS ES9260 CODEC (rear panel audio)
  – High Definition Audio
  – 2-channel
  Realtek® ALC897 CODEC (front panel audio)
• LAN:
  2 x Marvell® AQtion AQC113C 10GbE LAN chips
  (10 Gbps/5 Gbps/2.5 Gbps/1 Gbps/100 Mbps)
• Wireless Communication module:
  Intel® Wi-Fi 7 BE200
  – 802.11a, b, g, n, ac, ax, be, supporting 2.4/5/6 GHz carrier frequency bands
  – BLUETOOTH 5.4
  – Support for 11be 320MHz wireless standard
  (Actual data rate may vary depending on environment and equipment.)
  * Wi-Fi 7 features require Windows 11 SV3 to function properly. (There is no support driver for Windows 10.)
  ** Wi-Fi 7 channels on 6 GHz band availability depends on individual country’s regulations.

• Expansion Slots:
  CPU:
  – 1 x PCI Express x16 slot, supporting PCIe 5.0 and running at x16 (PCIEX16)
  – 1 x PCI Express x16 slot, supporting PCIe 5.0 and running at x8 (PCIEX8)
  * The PCIEX8 slot shares bandwidth with the PCIEX16 slot. When the PCIEX8 slot is populated, the PCIEX16 slot operates at up to x8 mode.
  * The PCIEX16 and PCIEX8 slots can only support a graphics card or an NVMe SSD.
  If only one graphics card is to be installed, be sure to install it in the PCIEX16 slot.

  Chipset:
  – 1 x PCI Express x16 slot, supporting PCIe 4.0 and running at x4 (PCIEX4)
  * The PCIEX4 slot shares bandwidth with the M2L_SB connector. The PCIEX4 slot becomes unavailable when a device is installed in the M2L_SB connector.

• Storage Interface:
  CPU:
  – 1 x M.2 connector (Socket 3, M key, type 25110/22110/2580/2280 PCIe 5.0 x4/x2 SSD support) (M2A_CPU)
  – 1 x M.2 connector (Socket 3, M key, type 25110/22110/2580/2280 PCIe 4.0 x4/x2 SSD support) (M2B_CPU)
  Chipset:
  – 2 x M.2 connectors (Socket 3, M key, type 22110/2280 PCIe 4.0 x4/x2 SSD support) (M2P_SB, M2L_SB)
  – 4 x SATA 6Gb/s connectors (SATA3 4~7)
  Chipset+ASMedia® ASM1164 chip:
  – 4 x SATA 6Gb/s connectors (SATA3 0~3)
  RAID 0, RAID 1, RAID 5, and RAID 10 support for NVMe SSD storage devices
  RAID 0, RAID 1, RAID 5, and RAID 10 support for SATA storage devices
• USB:
  Chipset+Intel® Thunderbolt™ 5 Controller:
  – 2 x Intel® Thunderbolt™ 5 (USB Type-C®) ports on the back panel
  *Support up to 80Gbps with Thunderbolt devices
  *Support up to 40Gbps with USB4 devices
  *Support up to 20Gbps with USB 3.2 devices

  CPU:
  – 1 x USB4® USB Type-C® port onboard
  – 1 x USB Type-C® port with USB 3.2 Gen 2×2 support, available through the internal USB header

  Chipset:
  – 1 x USB Type-C® port with USB 3.2 Gen 2×2 support, available through the internal USB header
  – 2 x USB 3.2 Gen 2 Type-A ports (red) on the back panel
  – 2 x USB 3.2 Gen 1 ports on the back panel

  Chipset+USB 3.2 Gen 2 Hub:
  – 4 x USB 3.2 Gen 2 Type-A ports (red) on the back panel

  Chipset+USB 3.2 Gen 1 Hub:
  – 4 x USB 3.2 Gen 1 ports available through the internal USB headers

  Chipset+USB 2.0 Hub:
  – 4 x USB 2.0/1.1 ports available through the internal USB headers

• Internal I/O Connectors:
  1 x 24-pin ATX main power connector
  2 x 8-pin ATX 12V power connectors
  1 x CPU fan header
  1 x CPU fan/water cooling pump header
  4 x system fan headers
  2 x system fan/water cooling pump headers
  3 x addressable RGB Gen2 LED strip headers
  1 x RGB LED strip header
  4 x M.2 Socket 3 connectors
  8 x SATA 6Gb/s connectors
  1 x front panel header
  1 x front panel audio header
  1 x Intel® Thunderbolt™ 4 connector (USB4® USB Type-C® port)
  2 x USB Type-C® headers, with USB 3.2 Gen 2×2 support
  2 x USB 3.2 Gen 1 headers
  2 x USB 2.0/1.1 headers
  1 x Trusted Platform Module header (For the GC-TPM2.0 SPI/GC-TPM2.0 SPI 2.0/GC-TPM2.0 SPI V2 module only)
  1 x power button
  1 x reset button
  1 x Q-Flash Plus button
  1 x reset jumper
  1 x Clear CMOS jumper
  2 x temperature sensor headers
  1 x noise detection header
• Back Panel Connectors:
  1 x DisplayPort In port
  1 x HDMI port (Note)
  2 x audio jacks
  2 x Intel® Thunderbolt™ 5 connectors (USB Type-C® ports)
  2 x USB 3.2 Gen 1 ports
  6 x USB 3.2 Gen 2 Type-A ports (red)
  2 x antenna connectors (2T2R)
  2 x RJ-45 ports

  (Note) Actual support may vary by CPU.

• I/O Controller: iTE® I/O Controller Chip
• H/W Monitoring:
  Voltage detection
  Temperature detection
  Fan speed detection
  Water cooling flow rate detection
  Fan fail warning
  Fan speed control
  * Whether the fan (pump) speed control function is supported will depend on the fan (pump) you install.

  Noise detection

• BIOS:
  1 x 256 Mbit flash
  Use of licensed AMI UEFI BIOS
  PnP 1.0a, DMI 2.7, WfM 2.0, SM BIOS 2.7, ACPI 5.0
• Unique Features:
  Support for GIGABYTE Control Center (GCC)
  * Available applications in GCC may vary by motherboard model. Supported functions of each application may also vary depending on motherboard specifications.

  Support for Q-Flash
  Support for Q-Flash Plus
  Support for Smart Backup

• Bundled Software:
  Norton® Internet Security (OEM version)
  LAN bandwidth management software
• Operating System:
  Support for Windows 11 64-bit
  (Go to GIGABYTE’s website for operating system support information.)
• Form Factor: E-ATX Form Factor; 30.5cm x 28.5cm