GIGABYTE M30 SSD 1TB
Interface PCIe 3.0×4, NVMe 1.3 Form Factor M.2 2280 Total Capacity 1TB NAND 3D TLC NAND Flash External DDR Cache DDR3L 2Gb
৳ 12,000.00
Product Description
Description
Xtreme Storage Performance
With the high-quality controller and flash, GIGABYTE M30 SSD can reach up to 3500 MB/sec sequential read, and up to 3000 MB/s sequential writes. Moreover, it comes with the DDR3L DRAM, SLC Cache, and advanced LDPC error correction to enhance the performance. It’s an ideal choice for gamers, PC enthusiasts, and content creators.
Under a high-stress workload, most SSD controllers can peak over 70°C. In this situation, the drives will start slowing down to avert itself from failing. The hotter your SSD runs, the quicker it wears out the flash inside of the drive. GIGABYTE M30 SSD applied with 2 oz copper PCB design, which helps dissipate heat and prevent throttling.
Why is keeping A SSD at lower tempertures so important?
Higher working temperature may cause data loss. The degradation factor of data loss could be a hundred times higher. With 2 oz coppetr PCB, GIGABYTE M30 SSD can operate at lower working temperatures to improve data storage reliability. Furthermore, SSDs can running at extreme performance longer.
Specification
-
InterfacePCIe 3.0×4, NVMe 1.3
-
Form FactorM.2 2280
-
Total Capacity1TB
-
NAND3D TLC NAND Flash
-
External DDR CacheDDR3L 2Gb
-
Sequential Read speedUp to 3500 MB/s
-
Sequential Write speedUp to 3000 MB/s
-
Random Read IOPSup to 308K
-
Random Write IOPSup to 332K
-
Dimension22 x 2.3 x 80 mm
-
Mean time between failure (MTBF)2 million hours
-
Power Consumption (Active)Average: R: 5.9W, W:5W
-
Power Consumption (Idle)L0/L0s/L1: 900mw
L1.2 < 3mw -
Temperature (Operating)0°C to 70°C
-
Temperature (Storage)-40°C to 85°C
-
Warranty
- 1. Limited 5-years or 650TBW.
- 2. Limited warranty based on 5 years or 650TBW, whichever comes first. (*TBW is evaluated by JEDEC workload standard. )
*TBW (Terabyte Written): Terabytes Written is the total amount of data that can be written into a SSD before it is likely to fail. - 3. When the usage of an NVME SSD as indicated by the “Percentage Used” (SMART ID: 05) in SMART page of “GIGABYTE SSD toolbox” reaches 100 means out of warranty. (A new unused product will show the number of 0)
-
Note
- • Test system configuration: configuration may vary by models, we will choose the latest platform for verification.
- • Performance may vary based on SSD’s firmware version and system hardware & configuration. Sequential performance measurements based on CrystalDiskMark and IOmeter 1.1.0.
- • Speeds based on internal testing. Actual performance may vary.
- • 1GB = 1 billion bytes. Actual useable capacity may vary.
More Information:
Name: Md.Tangim Chowdhury
Phone Number: +8801730-701983
Email: tangim.chowdhury@localhost
There are no reviews yet.